Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser for CAN buses. It is discreet It does not include LED indicators or key fobs, and is hidden within the wiring of the vehicle.
It also allows the user to disable the system temporarily through Transport Mode in the event of renting out their vehicle. This guide will walk you through the installation of a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your vehicle from key hacking attacks, cloning attacks and relay attacks. The system is directly connected to the ECU of your vehicle and protected by a pin code that you choose. It is not detected by thieves using diagnostic scanners or other modern methods. It cannot be disabled using circuit cuts.
The system is simple to use, however it's important to have professional installation to ensure a secure and secure connection with your vehicle's ECU. Installers certified by Thatcham can assist you with the installation and programming of your Ghost system. They can also suggest an alarm or tracking system to complete the protection package for your vehicle.
First, the installer needs to disconnect your battery in order to avoid the possibility of airbag deployment and short circuits. When the battery is disconnected, the installer can start working safely. Basic hand tools are helpful to make precise connections, while a multimeter can be used to verify electrical values and safety. Insulation tape and cable tie are crucial to ensure connections are secure and keep wiring neat. The Ghost Immobiliser user manual will give specific instructions that are specific to your particular model.
During the installation process, it's crucial to select an area for grounding that is free of paint and debris. The installer must also make sure the immobiliser's CAN H as well as CAN L wires are connected to the correct ports on your vehicle's ECU. auto ghost immobiliser can be plugged in or soldered, depending on the model. Using a top-quality connector is recommended to ensure a long-lasting and secure connection.
Transport Mode can be turned on by the client after the installation is completed. This allows valet parking or mechanics to access the vehicle without knowing the pin code. To accomplish this, the customer must hit the service button on the dashboard 5 times within 2 seconds. The system will confirm this by showing five indicators.
The Autowatch Ghost 2 immobiliser is TASSA approved and is a highly efficient immobiliser. It's an excellent option for those who regularly rents out their vehicles on platforms such as Turo. Having an immobiliser can also lower insurance costs, as it significantly decreases the risk of theft.
Getting Started
If you're looking for a solution to secure your vehicle from thieves, you can't go wrong with an autowatch ghost immobiliser. It prevents your car from running even if someone steals or copies your key. This is due to its sophisticated technology that is designed to prevent the engine from running unless the correct PIN code is entered.
The device connects to the vehicle's bus network CAN and allows direct communication with the ECU. It makes use of buttons already on the dashboard and the steering wheel to create a unique sequence only you can identify which makes it impossible for others to start your vehicle. This is the most secure way to protect your pride and joy. It will keep its value intact if you ever want to sell it.
Installing an immobiliser from Ghost is simple, but you must follow the directions to avoid electrical issues and system malfunctions. You must first locate a 12V power supply and a good grounding on the car's chassis. Then, you can begin to connect the wires for the immobiliser. Make sure to use high-quality connectors and soldering methods to ensure a secure connection. Insulate the connections using heat shrink tubing, insulation tape or other materials to avoid electrical short circuits.
After the wires have been connected, you are able to reconnect the battery and then turn on the engine to test the immobiliser's functionality. After you've verified that everything is functioning properly and you are satisfied, you can place the immobiliser in a safe position inside the vehicle. Make sure you hide it in a secure manner to prevent thieves from getting into it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified This means it is in compliance with the highest standards of security and is an excellent protection against car thieves. It provides superior protection against key cloning, hacking and relay attacks. It cannot be disabled without knowing the code. The device is simple to use, and it can be set up to a service valet setting so that your vehicle won't be activated when you take it for an MOT or servicing.
Wiring
The Ghost Immobiliser, a cutting technological security system, has been designed to deter theft of vehicles. It communicates with your vehicle's ECU and directly connects to its CAN bus. The Ghost Immobiliser will not interfere with your vehicle's factory settings, unlike other aftermarket systems that require the removal of circuit elements.
The system is also unnoticeable by thieves using diagnostic scanning tools. This is due to the fact that it does not transmit and receive radio frequency signals, and it utilizes the CAN data format to communicate with your ECU. It doesn't require any modifications to your current key fobs.
To utilize the Ghost Immobiliser, simply turn on your car's ignition and enter your sequence for disarming (either one or two buttons). The indicator will flash twice to verify that you've entered the correct code. You are now able to begin driving your car safely.
Once installed, the Ghost Immobiliser protects your car against hacking or key cloning, while protecting its value. In Transport Mode, you can temporarily disable the Ghost Immobiliser in case you need to give your vehicle to service or valet park.
You'll require a continuous power source (12V) as well as an earthing point to complete the installation of the Ghost immobiliser. Ensure that these are both well-insulated and safe to touch. Cable ties are also suggested to secure the wires. This reduces the risk of theft by potential thieves. To avoid committing mistakes, make sure to double-check these points and mark them using labels or tape. It's important to inspect all connections for signs of wear and tear. Loose connections can lead to problems with the system, so be sure that they're firmly in place and properly insulated. Don't forget to test your Ghost Immobiliser after installation has been completed. This will confirm that the unit functions correctly and that all connections and insulation are secure. Make sure to address any problems immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge vehicle security system that is integrated into your vehicle's ECU to block unauthorised engine start. Its cutting-edge technology safeguards your car against hacking, key cloning, and other typical tactics thieves employ to steal vehicles. The Ghost also works in tandem with other alarm and tracking systems to give the most complete protection for your vehicle. The Ghost's unique features, paired with its discreet design makes it a sought-after choice for car enthusiasts as well as security-conscious drivers.
To ensure the proper integration of the Ghost Immobiliser, you must to follow all steps of the installation procedure. Refer to the wiring diagram for the vehicle to aid you in locating and connecting the wires. You'll then need to identify the grounding and power sources. Once you've located them, you'll need to mark the points to make them easy to identify during installation. Finally, it's vital to use only the best tools and materials. Basic hand tools will help you make precise connections. A multimeter will check electrical values, and ensure safety. Cable tie and insulation tape ensure that all connections are neat. Finally, a user manual will give specific guidelines specifically tailored to your Ghost model.
It is crucial to test the system prior to installing it. Enter the PIN code into the system and start the vehicle. This step will confirm the immobiliser works as intended and will stop vehicle starts that are not authorized. This step should be done frequently as part of your regular inspections of your vehicle to ensure the system is always working correctly.
After the installation is completed, you can begin driving your car with confidence. The Ghost will guard your vehicle from potential car thieves. It will ensure that no one can escape with your car if they do not have the correct PIN code. The Ghost can be paired with an approved Thatcham tracker, which detects attempts at theft or tampering. This allows you to locate your car if it's stolen.
The Ghost is compatible with a range of vehicles, including those made by most major manufacturers. Monty's Locksmith can assist you in securing your vehicle using this cutting-edge device. Contact us today to learn more about our services and installation options. We are a TASSA registered installer, a certificate that ensures that we adhere to strict standards for installing our products. This guarantees customers as well as insurance companies and law enforcement agencies that installations are performed safely and properly.